Chroma 19073 Hipot Tester (AC/DC/IR) - Sentry 30 Plus

Price:

$1,219.00

Condition:

New

Availability:

Available

Shipping:

Free Shipping

Model	19071	19073	19052	19053	19054
Mode	ACV	ACV / DCV / IR	ACV / DCV / IR	ACV / DCV / IR / SCAN
Scanner Unit	-	-	-	8 ports,±phase	4 ports,±phase
Withstanding Voltage Test
Output Voltage	AC : 0.05 ~ 5kV, DC : 0.05 ~ 6kV
Load Regulation	26.4555(1%+5V)
Voltage Resolution	2V
Voltage Accuracy	1% of setting + 5 count
Cutoff Current	AC : 0.1~20mA, DC : 0.01 ~ 5mA		AC : 0.1 ~ 30mA, DC : 0.01 ~ 10mA
Current Resolution	AC : 1µA, DC : 0.1µA
Current Accuracy	±(1.5% of reading + 5 counts)		±(1% of reading + 5 counts)
Output Frequency	50Hz / 60Hz
Test Time	0.3 ~ 999 sec., continue
Ramp Time	0.1 ~ 999 sec., off
Fall Time	0.1 ~ 999 sec., off
Dwell Time	0.1 ~ 999 sec., off
Waveform	Sine wave
Flashover (ARC) Detection
Setting Mode	Programmable setting
Detection Current	AC : 1mA ~ 20mA, DC : 1mA ~ 5mA		AC : 1mA ~ 15mA, DC : 1mA ~ 10mA
Secure Protection Function
Fast Output Cut-off	0.4ms after NG happen
Ground Fault Interrupt	0.5mA ±0.25mA AC, ON/OFF
Panel Operation Lock	Present password
Continuity Check	1~5Ω ± 0.2Ω, ON/OFF		1Ω ± 0.2Ω, ON/OFF
GO/NG Judgment Window
Indication, Alarm	GO : Short sound, Green LED ; NG : Long sound, Red LED
Data Hold	Least tests data memories
Memory Storage	10 steps or 60 groups for total 60 memory		99 steps or 99 groups for total 500 memory
Remote & Interface
Remote control	Input : Start, Stop, Interlock (at 11 pin terminal block only) ; Output : Under test, Pass, Fail
Communication Interface	RS485 (Option)		RS232 (Standard), GPIB (Option)